Vortex Liquid Flow Meters for Water and Crude Oil
-
Payment
-
Origin
China Mainland
-
Minimum Order
1
-
Packing
Pieces
- Contact Now Start Order
- Description
Product Detail
TEMGB vortex flowmeter is used for measuring the flow velocity of gases or liquids in pipelines flowing full. The measuring principle is based on the development of a Karman vortex shedding street in the wake of a body built into the pipeline.
The periodic shedding of eddies occurs first from one side and then from the other side of a bluff body (vortex-shedding body) installed perpendicular to the pipe axis. Vortex shedding generates a so-called "Karman vortex street" with alternating pressure conditions whose frequency is proportional to the flow velocity.
Advantages
Accuracy:± 1.5% of Rate / ±1.0% of Rate
Diameter range: DN20-DN300
Fluid Temp.: - 20...+350°C
Housing Material: SS304 / SS316
Application Range: Gas; liquid; steam
Connection: wafer/Flange
Output | Signal Output | Pluse and 4-20mA | |
Communication output | RS485 and Hart | ||
Power supply | External | +24VDC, suitable for 4-20mA, pluse and RS485 etc. | |
Built-in | S type | 3.6V 9Ah lithium battery | |
Interface | M20×1.5 | ||
Explosion-Proof | ExiaIICT5 | ||
Protection | IP65 or (customize) |
Application Range | 1 Gas; 2. Liquid; 3. Steam |
Primary Measured Value | Flow Rate |
Secondary Measured Value | Volume Flow( Pressure and Tempearture is available |
Process Temperature | T1 Level: -20...100 deg cel |
T2 Level: -20...250 deg cel | |
T3 Level: -20...350 deg cel | |
Pressure | |
EN 1092-1 | DN200...DN300: PN10 |
DN100...DN200: PN16 | |
DN15...DN80: PN25 | |
Other pressure is on request | |
ASME B16.5 | 1/2"...8": 150# |
Other pressure is on request | |
JIS | 1/2"...8": 10K |
Other pressure is on request | |
Accuracy | For liquid: 1.0% of rate |
For gas/ steam: 1.5% of rate | |
Body Material | SS304 |
SS316 | |
Converter material | Standard: Polyurethane coted die-cast aluminium |
Diameter | Liquid | Gas | |
(mm) | (Inch) | Flow(m3/h) | Flow(m3/h) |
15 | 1/2" | 1.2-6.2 | 5-25 |
20 | 3/4" | 1.5-10 | 8-50 |
25 | 1" | 1.6-16 | 10-70 |
40 | 1-1/2" | 2.5-26 | 22-220 |
50 | 2" | 3.5-38 | 36-320 |
65 | 2-1/2" | 6.2-65 | 50-480 |
80 | 3" | 10-100 | 70-640 |
100 | 4" | 15-150 | 130-1100 |
125 | 5" | 25-250 | 200-1700 |
150 | 6" | 36-380 | 280-2240 |
200 | 8" | 62-650 | 580-4960 |
250 | 10" | 140-1400 | 970-8000 |
300 | 12" | 200-2000 | 1380-11000 |
- ZBL-C310A Rebar Rust Detector Concrete Reinforcement Corrosion Analyser 5 Pieces / (Min. Order)
- Stationary Type Ultrasonic Flow Meter 1 Pieces / (Min. Order)
- Concrete Rebound Test Schmidt Hammer 1 Pieces / (Min. Order)
- Open Channel Flowmeter Monitoring Water 1 Pieces / (Min. Order)
- Open Channel Ultrasonic Flow Meters Measures Water and Wastewater 1 Pieces / (Min. Order)
- Gas Turbine Flow Meter Monitor Devices for Gas Flow Measurement 1 Pieces / (Min. Order)
- Liquid Turbine Flow Meter Senosr Measures Water and Fuel Oil and Diesel Industrial Applications 1 Pieces / (Min. Order)
- Hand Held Ultrasonic Flow Meter Clamp-on Type offered by Dalian Measurement 1 Pieces / (Min. Order)
- Ultrasonic Clamp on Non-invasive Liquid Water Flow Meters-TDS-100 Series 1 Pieces / (Min. Order)
- Fixed Transit Time Ultrasonic Flow Meter for Liquid Monitoring 1 Pieces / (Min. Order)